Body/Exterior

Range Rover Evoque Discovery Sport LR2 Hood Gate Door Rubber Bumpers Genuine LR102640 x2

Part number:  LR102640   These rubber bumpers provide a buffer between hoods, doors and tail gates when these panels are closed.   They become dry rotted and brittle as time passes.     Fits the following Land Rover...

Land Rover LR3 LR4 Rear Glass Wiper Arm + Blade + Cap Assembly by Allmakes 4x4

  Part number:  DKB500690-AM This rear wiper arm + blade + pivot cap assembly fits the following Land Rover vehicles: -LR4 (2010-2016) -LR3 (2005-2009)   By Allmakes...

Tow Hitch Receiver Plug for LR3 LR4 Range Rover Sport KNG500013 by Allmakes 4x4

  Part number:  KNG500013-AM Land Rover's unique quick-release tow hitch receiver system mounts into an aperture under the rear bumper.   When the hitch receiver isn't installed, this red plug cover should be fitted to prevent the build...

LR4 Range Rover Sport Door Interior Handle Release Cable LR013916

  Part number:  LR013916 It can be very frustrating when you can't get out of your vehicle because the door handle won't engage the latch and open the door. Sometimes these cables get rusty and break.  Replace your broken cable with...

Land Rover Hood Latch Less-Switch LR138825 by Allmakes 4x4

  Part number:  LR138825-AM Hood latch for Land Rover vehicles - less the security sensor/switch.   Fits the following Land Rover models: -Range Rover L405 (2013-2021) -Range Rover Sport L494 (2014-2021) -Range Rover Sport...

Anti-Theft Security Alarm Hood Latch + Switch Sensor LR138826 by Allmakes 4x4

  Part number:  LR138826-AM The hood switch problem on Land Rover vehicles has become very common. When the sensor fails, the "Bonnet Open" dash light may stay on or the alarm intermittently sounds for no apparent reason...

Rear License Plate Bracket Insert Nuts for LR3 LR4 Range Rover Sport DYH000140

  Part number:  DYH000140 These plastic anchor nuts insert into apertures in the rear gate in order to mount the rear license plate bracket for the following Land Rover vehicle applications: -Range Rover Sport (2006-2013) -LR4...

LED Replacement Rear License Plate Lamps for LR2 LR3 LR4 Range Rover Sport XFC500040

  Part number:  XFC500040LED The original equipment license plate lamps eventually become corroded over time and eventually fail.  Take the opportunity to upgrade to this set of LED lights from Britpart.   Set fits the following...

LR3 LR4 Upper Tail Gate Hatch Struts - Set of 2 by Stabilus

  Part number:  LR086368G  These struts eventually weaken and fail to support the lift gate. Stabilus is actually the manufacturer used for genuine Range Rover tail gate struts. These are the same parts, just without the Land Rover part...

Bumper Towing Eye Cover Quarter Turn Clip - LR012844 by Allmakes 4x4

  Part number:  LR012844-AM Several Land Rover models use this quarter turn clip, coupled with turnbuckle clips in order to secure removable body panels. Used for the following applications: -LR4 (2010-2016) - Front bumper towing eye...

8x20mm Push Rivet Fastener by Allmakes 4x4

  Part number:  ANR2224-AM This push rivet or scrivet is used for several land Rover models to fasten plastic body panels, shields and moldings. Once it is pushed into an aperture, the head sits flat and the inner shaft expands to fasten...

Bumper Towing Eye Cover Quarter Turn Clip + Receiver Turnbuckle Set by Allmakes 4x4

  Part number:  DYR500010-AM + DYF500010-AM Several Land Rover models use this turnbuckle + quarter turn clip in order to secure removable body panels. Used for the following applications: -LR3 (2005-2009) - Rear bumper towing eye...